us

In-die insertion

The insertion heads are installed either solid on the lower shoe (limiting the potential shocks) or mobile in the upper part of the tool: the client and/or the constraints of the part decide on this. The integration of the insertion heads in the tool is very simple: installation is done in just a few minutes thanks to the use of mounting systems and rapid industrial connectors for all types of feed (electrical, pneumatic and inserts); in addition, thanks to a dedicated poke-yoke system, set-up errors are avoided.
A kart, connected to the die, feeds the insertion heads via a distribution system best adapted to the part (vibrating bowl, etc.); this kart, equipped with 1 to 3 distribution systems can feed up to 4 heads via specific, flexible feeder pipes.

Several component references and dimensions can be inserted simultaneously in series up to 60 (or more) parts per minute per head (depending on the application and die parameters).

Generally independent from the die kinematics, each head can be used in several applications, offering investment optimization and/or securing the means of production.
PRONIC can also supply a complete range of punches dedicated to the insertion operations.
Finally, the PRONIC Detec system guarantees 100% accurate parts, i.e. the presence of the insert in its correct position.

In short

Safeguards:
  • The insertion head and the distribution kart are safe-guarded by several sensors which control the correct position of the insert before the next step in the process.
  • Production is safe-guarded using a dedicated system that allows the presence of inserted components to be detected.
Reduced investments:
  • By reusing heads in several dies, you can reduce costs and/or easily safe-guard your production.
Facility and rapidity:
  • Our design is adapted to the press environment and all connections are of the industrial tool-less type
  • Installation is simple, efficient (poke-yoke) and does not require a specific tool.

PRONIC guides you throughout the project and in particular to sign off the integration of the insertion head into your die design.

PRONIC - Votre référence taraudage et insertion sous presse.

Rivets insertion

Insertion type : Deformation insert
Frequency : 30 cps/min
Insertion direction : PRONIC - Rivets insertion.
Transfer of the Trolley head : air pressure

Watch the video

Find out more

More videos
 

PRONIC - Votre référence taraudage et insertion sous presse.

Nuts insertion

Insertion type : Band deformation
Frequency : 30 cps/min
Insertion direction : PRONIC - In-Die world leader in tapping and made to measure insertionPRONIC - In-Die world leader in tapping and made to measure insertion
Dimensions : M4 à M10 et plus
M4 to M10 and more
Insertion of standard nuts available on the market or specific nuts
Transfer of the trolley head : air pressure or intubation

Watch the video

Find out more

More videos

PRONIC - Votre référence taraudage et insertion sous presse.

Ball Joints rivets Insertion

Insertion type : Deformation insert
Frequency : Up to 40 cps/min (within the parameters of the tool).
Insertion direction : PRONIC - In-Die world leader in tapping and made to measure insertionPRONIC - In-Die world leader in tapping and made to measure insertion
Insertion in 2 steps : insertion/pre-setting and final calibration.
Insertion from top to bottom with the mounting beneath the mobile support, or from top to bottom with the head mounted on the upper part of the tool, the heads being reusable.
Customizable and adaptable to, in respect of its surroundings and the fragility of the functional parts of the articulations of the head.
Transfer of the trolley head : air pressure and gravity

Watch the video

Find out more

More videos

PRONIC - Votre référence taraudage et insertion sous presse.

Spacers insertion

Insertion type : Deformation insert
Frequency : 30 cps/min
Insertion direction : PRONIC - In-Die world leader in tapping and made to measure insertion PRONIC - In-Die world leader in tapping and made to measure insertion
Transfer of the trolley head : air pressure or intubation

Watch the video

Find out more

More videos
 

PRONIC - Votre référence taraudage et insertion sous presse.

Bushings Insertion

Insertion type : Deformation insert
Frequency : up to 50 cps/min (within the parameters of the tool) and up to four bushings at a time
Insertion direction : PRONIC - In-Die world leader in tapping and made to measure insertion PRONIC - In-Die world leader in tapping and made to measure insertion
Dimensions : insertion of the bushings from ø9 to ø25mm (others upon request), thickness 0,5- or 1-mm. Insertion from bottom to the top (preferred) with the head mounted on the lower plate, or from the top towards the bottom with the head mounted on the upper part of the tool heads reusable. Insertion in 3 or 4 steps depending on the type of bushings.
Complete solution with the distribution trolley mono or bi or multiple outlets + flexible distribution conduits, markings + detection + control.
Transfer of the trolley head : air pressure

Watch the video

Find out more

More videos
 

PRONIC - Votre référence taraudage et insertion sous presse.

Axis insertion

Insertion type : Deformation insert
Frequency : 25 to 40 cps/min
Insertion direction : PRONIC - In-Die world leader in tapping and made to measure insertion PRONIC - In-Die world leader in tapping and made to measure insertion PRONIC - In-Die world leader in tapping and made to measure insertion
Transfer of the trolley head : air pressure or intubation

Watch the video

Find out more

More videos

PRONIC - Votre référence taraudage et insertion sous presse.

Clip nuts insertion

Insertion type : Deformation insert
Frequency : 40 to 50 cps/min Autonomous head of the press
Insertion direction : PRONIC - In-Die world leader in tapping and made to measure insertion PRONIC - In-Die world leader in tapping and made to measure insertion
Transfer of the trolley head : air pressure

Watch the video

Find out more

More videos

PRONIC - Votre référence taraudage et insertion sous presse.

Stud Insertion

Insertion type : Deformation insert
Frequency : 30 to 40 cps/min
Insertion of all types of studs.
Insertion from top to bottom uniquely, re-usable heads.
Insertion direction : PRONIC - In-Die world leader in tapping and made to measure insertion
Transfer of the trolley head : air pressure

Watch the video

Find out more

More videos

PRONIC - Votre référence taraudage et insertion sous presse.

More inserts

Insertion of special.
Insertion bottom-up or top-down (e.g. up to 4 spacers per press stroke), reusable heads.
Insertion 1 step (e.g, bearing in a pre-formed collet) or 2 steps.
Tailor made and adaptable to the environment.
Complete solution with distribution kart (up to 3 bowl feeders) + flexible feeder pipes + detection and control.
Rate : up to 40 strokes/min (depending on the type of inserts and die parameters).
Transfer of the trolley head : air pressure or intubation

More videos

Insertion equipment

PRONIC - Votre référence taraudage et insertion sous presse.

INSERTION HEAD

FEATURES :

• Quick connections
• Quick assembly kit
• Reusable in multiple tools
• Insertion possible in all directions: up, down, sideways

PRONIC - Votre référence taraudage et insertion sous presse.

Distribution kart

FEATURES :

• 1 to 3 vibrating bowls
• 2 to 6 outputs
• Quick connections
• Easy to move

Insertion accessories

Pronic can offer a complete customized solution (machine module); the only thing left to do is to install the tool in the space reserved for it.

Reliable mechanical system based on our expertise in tapping under pressure assuring the fabrication of good pieces.

Flexible conduits adapted to insertion (form, masse, etc.) and its kinematics.
Poinçons (for bushings): made for measure

Stay informed!

Sign up now
to receive our latest news.


I subscribe!
By clicking on 'I subscribe', I declare explicitly that I have read and understood the personal data protection policy, and therefore consent to PRONIC processing my personal data according to the principles and methods defined therein.